Skip to the posts
Buffalo's neighborhood journals since 2003 🍀 Patrick Spicy Devil Logan🌭 Sahlen🥨 Weber Spank🥟 Pierogi🐸 Scaj🍺 Labatt Utica Pink Cherio❄️ Snow Murder

paul’s journal

Posts from January 2023

Mike and The Massage Gun

Had a bunch of leftover FSA money and bought all these medical supplies including this amazing massage gun which I got for 50% off.

image

Then after the FSA expired, we submitted and it turned out it didn't qualify ;( I would have never spent this kind of money on it, but I like it at least.

Everything else I bought on [link]https://fsastore.com[/link] to make sure it worked.

Like a brand new Lithman stethoscope. You might ask, "why did you pick a stethoscope?" Well I had already picked tons of bandaids and most everything else was some sort of electronic that would eventually fail.

The Gumball Bandit of Buffalo Blizzard December 2022

·

Just didn't want to forget the Buffalo Blizzard 2022 Gumball Bandit. I made so many iterations of this.

This one was the victorian version in the blizzard of 1888

image

Here was the original

image

The way people talk about it you would think this would have been the city response.

image

Building a custom copper Kingsong s18 stand in Buffalo

·

Now that I euc in the snow all the time I needed a nice tall stand for drippy tire.

I decided to go with copper because it's strong and relatively easy to shape.

I have a plastic 3d printed one near my desk at work UT wanted something nicer for the house.

Started with 10 ft copper pipe.

Cut 2, 6in and 6, 8 Inc lengths of pipe with a hand pipe cutter.

Sanded them down with sand paper and a wire brush.

Then using flux, mapp gas and solder, joined the elbows.

It needs to be 6 inches wide and around 8 inches tall. Having 8 inch long rains also makes it easy to set the unicycle on it without having to get it just right.

After I sanded it down to look nice and remove and pipe branding.

image

image

image

image
image
image
image
image
image
image

Kingsong s18 lift sensor repair

·

I just recently replaced the control board on my s18 after I tripped over the powercord and sadly cracked the power socket.

Sadly, after the surgery was complete, the lift sensor on the Kingsong s18 did not work when I would lift the handle to carry it while still on :( Instead, the wheel spins out and was really inconvenient to have to turn on and off to carry it somewhwre.

It was hard to find answers but Jason from ewheels.com had a tip. Apparently, the lift sensr works by magnetic field detection and the if the magnet on the motherboard is not directed toward the trolley handle where the corresponding magnet sits, then it can't detect its up.

So I reopened up the EUC and moved the magnet sensor toward the handle a bit. I tried it a few times till it was perfect then screwed everything back in. Works like a charm now everytime. Happy to help anyone who needs it.

image

Centos Stream

·

I was sad to hear about the CentOS changes when they were first posted on the centos blog but I am going to trying to not freak and think it might be a positive move. I mean it seems in the last few years I have more often been annoyed at how behind CentOS was from the current kernel. Maybe this will make it better. This article made me feel at least a little bit better.

The thing that annoyed me the most was that I had just moved servers from CENTOS 6 to 8 and I should have maybe just gone to 7. I guess only time will tell.

Fingers crossed. Server #1 - done!

image