More Coaches in Jockstraps
Posts from February 2023
Some Fun Patterns and Phone Background
I spend way to much on stable diffusion.
A handsome man in a yellow jockstrap throughout the ages
They are not real either
Amethyst Tortoise Jewelry
I can't stop with the tortoise jewelry
Mike and The Massage Gun
Had a bunch of leftover FSA money and bought all these medical supplies including this amazing massage gun which I got for 50% off.
Then after the FSA expired, we submitted and it turned out it didn't qualify ;( I would have never spent this kind of money on it, but I like it at least.
Everything else I bought on [link]https://fsastore.com[/link] to make sure it worked.
Like a brand new Lithman stethoscope. You might ask, "why did you pick a stethoscope?" Well I had already picked tons of bandaids and most everything else was some sort of electronic that would eventually fail.
Then after the FSA expired, we submitted and it turned out it didn't qualify ;( I would have never spent this kind of money on it, but I like it at least.
Everything else I bought on [link]https://fsastore.com[/link] to make sure it worked.
Like a brand new Lithman stethoscope. You might ask, "why did you pick a stethoscope?" Well I had already picked tons of bandaids and most everything else was some sort of electronic that would eventually fail.
The Gumball Bandit of Buffalo Blizzard December 2022
Just didn't want to forget the Buffalo Blizzard 2022 Gumball Bandit. I made so many iterations of this.
This one was the victorian version in the blizzard of 1888
Here was the original
The way people talk about it you would think this would have been the city response.
This one was the victorian version in the blizzard of 1888
Here was the original
The way people talk about it you would think this would have been the city response.
pearl tortoises
A giant toirtoise made of gold, pearls, quartz and rubys, victorian opulence
Stable Diffusion - A sheep Transformed
Here is Sarah - a sheep transformed via stable diffusion into the super cyborg she really is.
Here we have little Sarah back in 2018 in the photo this was based on.
Here we have little Sarah back in 2018 in the photo this was based on.
Building a custom copper Kingsong s18 stand in Buffalo
Now that I euc in the snow all the time I needed a nice tall stand for drippy tire.
I decided to go with copper because it's strong and relatively easy to shape.
I have a plastic 3d printed one near my desk at work UT wanted something nicer for the house.
Started with 10 ft copper pipe.
Cut 2, 6in and 6, 8 Inc lengths of pipe with a hand pipe cutter.
Sanded them down with sand paper and a wire brush.
Then using flux, mapp gas and solder, joined the elbows.
It needs to be 6 inches wide and around 8 inches tall. Having 8 inch long rains also makes it easy to set the unicycle on it without having to get it just right.
After I sanded it down to look nice and remove and pipe branding.
I decided to go with copper because it's strong and relatively easy to shape.
I have a plastic 3d printed one near my desk at work UT wanted something nicer for the house.
Started with 10 ft copper pipe.
Cut 2, 6in and 6, 8 Inc lengths of pipe with a hand pipe cutter.
Sanded them down with sand paper and a wire brush.
Then using flux, mapp gas and solder, joined the elbows.
It needs to be 6 inches wide and around 8 inches tall. Having 8 inch long rains also makes it easy to set the unicycle on it without having to get it just right.
After I sanded it down to look nice and remove and pipe branding.
Kingsong s18 lift sensor repair
I just recently replaced the control board on my s18 after I tripped over the powercord and sadly cracked the power socket.
Sadly, after the surgery was complete, the lift sensor on the Kingsong s18 did not work when I would lift the handle to carry it while still on :( Instead, the wheel spins out and was really inconvenient to have to turn on and off to carry it somewhwre.
It was hard to find answers but Jason from ewheels.com
had a tip. Apparently, the lift sensr works by magnetic field detection and the if the magnet on the motherboard is not directed toward the trolley handle where the corresponding magnet sits, then it can't detect its up.
So I reopened up the EUC and moved the magnet sensor toward the handle a bit. I tried it a few times till it was perfect then screwed everything back in. Works like a charm now everytime. Happy to help anyone who needs it.
Sadly, after the surgery was complete, the lift sensor on the Kingsong s18 did not work when I would lift the handle to carry it while still on :( Instead, the wheel spins out and was really inconvenient to have to turn on and off to carry it somewhwre.
It was hard to find answers but Jason from ewheels.com
had a tip. Apparently, the lift sensr works by magnetic field detection and the if the magnet on the motherboard is not directed toward the trolley handle where the corresponding magnet sits, then it can't detect its up.So I reopened up the EUC and moved the magnet sensor toward the handle a bit. I tried it a few times till it was perfect then screwed everything back in. Works like a charm now everytime. Happy to help anyone who needs it.
