Category: linux
10/14/11 03:55 - ID#55293
Worst luck indeed: Fedora 15 BSOD
Transcript of Error:
[5.693915] nouveau 0000:01:00.0: Invalid ROM contents
[5.825510] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[5.849874] nouveau 0000:01:00.0: 0XD518: i2c wr fail: -6
[5.964968] nouveau 0000:01:00.0: PGRAPH: unsupported chipset, please report!
[6.092104] [drm: intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
Looks like I might need a hard reboot. The wretched thing is not coming out of this error screen. And it goes into it at every boot and suspend.
Apparently, this is a known new bug:
With some insights from here:
ds,
Your issue is related to the optimus technology deployed in the m14x, it's a new piece of tech that allows switching between your nvidia card and intel sandy bridge. In short, your nvidia card does not work on Linux out-of-the-box. Read more about how you can either disable your nvidia card (I did that and saved 14 w (1½ hours of battery time) or try and enable it using some experimental tech called switcheroo. Read more here:
Posted by Magnus Glantz 2011-07-06 01:07:30
My brother's hacky solution:
Close the lid for 15-30 seconds and then open. If it doesn't work, repeat as many times as necessary.
I can only say... !!!
Permalink: Worst_luck_indeed_Fedora_15_BSOD.html
Words: 223
Location: Buffalo, NY
Last Modified: 10/14/11 11:45
Category: linux
10/13/11 09:54 - ID#55291
Fedora 15/Satellite P750 Bluetooth issue
systemctl status bluetooth.servicebluetooth.service
- Bluetooth Manager
Loaded: loaded (/lib/systemd/system/bluetooth.service)
Active: active (running) since Thu, 13 Oct 2011 21:06:35 -0400; 43min ago
Main PID: 1027 (bluetoothd)
CGroup: name=systemd:/system/bluetooth.service
â”” 1027 /usr/sbin/bluetoothd -n
But the bluetooth gui says:
No Bluetooth adapters found
I am stumped. Is there a hardware switch to the bluetooth that is turned off?
rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
The bluetooth is not even there.
Gaaaah!!
lspci output
00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Device 0116 (rev 09)
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b4)
00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b4)
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation Device 0df4 (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8176 (rev 01)
04:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30)
04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30)
04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 30)
04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 30)
05:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
Some googling lead to another bloke facing the exact problem
Oct 13 21:57:15 bluetoothd[1027]: Stopping SDP server
Oct 13 21:57:15 bluetoothd[1027]: Exit
Oct 13 21:57:15 bluetoothd[1027]: bluetoothd[1027]: Stopping SDP server
Oct 13 21:57:15 bluetoothd[1027]: bluetoothd[1027]: Exit
Oct 13 21:57:16 bluetoothd[2481]: Bluetooth deamon 4.87
Oct 13 21:57:16 bluetoothd[2481]: bluetoothd[2481]: Bluetooth deamon 4.87
Oct 13 21:57:16 bluetoothd[2481]: Starting SDP server
Oct 13 21:57:16 bluetoothd[2481]: bluetoothd[2481]: Starting SDP server
Oct 13 21:57:16 bluetoothd[2481]: Parsing /etc/bluetooth/input.conf failed: No such file or directory
Oct 13 21:57:16 bluetoothd[2481]: bluetoothd[2481]: Parsing /etc/bluetooth/input.conf failed: No such file or directory
Oct 13 21:57:16 bluetoothd[2481]: Parsing /etc/bluetooth/audio.conf failed: No such file or directory
Oct 13 21:57:16 bluetoothd[2481]: bluetoothd[2481]: Parsing /etc/bluetooth/audio.conf failed: No such file or directory
Oct 13 21:57:16 NetworkManager[934]: bluez error getting default adapter: No such adapter
Some more googling lead to this thread:
Keany says:
before you start BT installation be sure WLAN LED is ON.
Hmm... so the WLAN LED is on, but the Bluetooth LED is not on and there is no function key to turn the bluetooth LED on!
Aarrrgh. Another unsolved mystery.
Permalink: Fedora_15_Satellite_P750_Bluetooth_issue.html
Words: 511
Location: Buffalo, NY
Last Modified: 10/13/11 10:22
Category: linux
10/13/11 09:27 - ID#55290
Texmaker error in Fedora 15
The wrestling match with Texmaker on Fedora 15 got way too confusing. I found that Texmaker has a fork called Texstudio and I have installed it instead. The x86_64 version of Texstudio for Fedora 15 is available here:
My most useful LaTeX editor doesn't start in Fedora 15. I am getting this error message:
texmaker: error while loading shared libraries: libQtWebKit.so.4: cannot open shared object file: No such file or directory
But I do have libQtWebKit.so.4!
whereis libQtWebKit.so.4
libQtWebKit.so: /usr/lib/libQtWebKit.so.4
After some googling, I think the problem lies here:
whereis libQtGui.so.4
libQtGui.so:
/usr/lib/libQtGui.so.4
/usr/lib64/libQtGui.so.4
To try and find out which one of these is "owned" or "required" by other packages, I used the syntax from this VERY helpful document:
rpm -qf /usr/lib/libQtGui.so.4
gives
qt-x11-4.7.4-2.fc15.i686
rpm -qf /usr/lib64/libQtGui.so.4
gives
qt-x11-4.7.4-2.fc15.x86_64
Just for kicks, I also queried rpm for everything containing qt
rpm -qa | grep -i qt
qt-x11-4.7.4-2.fc15.x86_64
PyQt4-4.8.3-2.fc15.x86_64
poppler-qt-0.16.7-1.fc15.x86_64
qt-webkit-4.7.4-2.fc15.i686
qt-x11-4.7.4-2.fc15.i686
qt-4.7.4-2.fc15.x86_64
qt-4.7.4-2.fc15.i686
Hmm... so my system is x86_64. Do I need these i686 packages? Are these not being recognized by texmaker, perhaps? Should I be deleting these i686 packages (and their dependencies) and replacing them with the x86_64 versions?
See solution at the top. It's not worth my time to be wrestling with this level of hideous confusion.
Permalink: Texmaker_error_in_Fedora_15.html
Words: 301
Location: Buffalo, NY
Last Modified: 10/14/11 10:28
Category: linux
10/13/11 02:13 - ID#55287
Fedora-tor!
Permalink: Fedora_tor_.html
Words: 21
Location: Buffalo, NY
Last Modified: 10/15/11 11:26
Category: music
10/12/11 09:55 - ID#55285
The Good, The Bad, The Ugly
favourites$absolutelyawesome <- which(YoYoMa == 'Amazing' & Ennio Morricone == 'Genius')
Permalink: The_Good_The_Bad_The_Ugly.html
Words: 13
Location: Buffalo, NY
Last Modified: 10/12/11 10:16
Category: linux
10/12/11 07:24 - ID#55284
Back on Fedora. Installing mp3/ape codecs.
And so I am back on Fedora 15 lovelock. Because that is my brother's preferred linux distro. Apparently he has now brute-forced F15 on the System76. I hope it works out for him. Since he has an internet connection that matches the century we live in (as opposed to the paleolithic lowly dial-up equivalent DSL that I have), the laptop didn't have any mp3 or ape codecs (because he streams all his media from the cloud).
Thankfully there is an easy way to make it old-world compatible.
In the terminal, type:
sudo c rpm -ivh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm rpm -ivh http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm yum -y install gstreamer-plugins-bad gstreamer-plugins-ugly xine-lib-extras-nonfree gstreamer-ffmpeg
Permalink: Back_on_Fedora_Installing_mp3_ape_codecs_.html
Words: 210
Location: Buffalo, NY
Last Modified: 10/13/11 10:31
Category: the odes
10/11/11 03:32 - ID#55277
Chris Rock!
Hiiiii!
like a stupid teenager.
After all the musings about what I would say if I ever ran across a hollywood star I really like, I just managed an extended single syllable.
He did say hello back, but what a ridiculously generic thing to say!
Permalink: Chris_Rock_.html
Words: 72
Location: Buffalo, NY
Last Modified: 10/11/11 03:32
Category: opinion
10/07/11 09:16 - ID#55259
Why I don't like Amazon anymore.
I had Amazon Prime for the whole of last year. It made me buy all sorts of irrational things, really. There was an element of thrill in getting something delivered in 2 days flat.
Then the wok drama happened (e:tinypliny,54693) I know this is probably going to sound petty. But the wok was in my shopping cart and I was definitely going to buy it that day. The price suddenly spiked up more than 2x the original cost just as I was taking the preliminary steps to go through the checkout process (And no, I don't have the one click magic phrase because I think it's such nonsense)!
I sent a nasty letter of complaint to Amazon and heard back from the customer service team. According to them the prices on Amazon are fair market prices (or something to that effect) and it's not under their control. I was annoyed and deleted the wok from the shopping cart. Needless to say the wok magically sprang back to its original lower price when I did.
If this had happened once or even twice I would have overlooked it but this kind of price jumping has happened quite a few times for me in the past. They definitely monitor the shopping carts of people in general (because I receive target email that explicitly says that it is for things related to the ones in my shopping cart). I think that when a critical mass of people have some item in their shopping cart, they try and increase profits with some atrocious price change. Of course, this is only a theory and a bitter one at that. I have no evidence but that is what the whole thing feels like to me.
I think most people research to at least some level before they buy things (unless it's a hasty impulse buy). ALL of my "big" purchase (above $80 for me) are well considered. Unless it's for necessary travel or something related to my immediate family I don't make impulse buys, on principle. I am morbidly scared of the "accumulation tax" that follows me around if I accumulate ridiculous junk with little purpose. So I know exactly what I am going to be spending on anything ages before I actually buy it. If I am not careful and just spend willy-nilly (I have in the past), the consequences are sometimes quite embarrassing (for e.g., rent cheque bouncing or some such stupid financial faux pas).
Given this level of thought that goes into what I buy, I appreciate it if the prices are stable. If Amazon or any other merchant thinks they should charge something for an item, they should just go ahead and tag it with that price instead of changing prices all the time. Unfavourable price changes makes customers who research annoyed and gives them an unsettling sense of not buying well. Favourable price changes makes them feel like they got a bargain - a kind of shifty emotional maneuvering to make them buy more impulsively. I know Amazon is not the only one that engages in all the price jumping but I just wanted to blow off some steam about the wok incident. ;-)
I ended up buying the wok from Overstock and not renewing my membership with Amazon. Thus far, I have bought 2 other beautiful fry pans and a sewing machine from Overstock. Each time the customer service has been exemplary and flawless. Sure, the deliveries take longer than 2 days but seriously, my kitchen is not going to implode if a frying pan (or really anything) that I have wanted for 3 or more months takes a few more days to arrive.
I have a massive paleolithic joke of an internet speed to even consider video on demand. Plus I don't like watching anything passively for more than 15 minutes anyway. I have some kind of an attention deficit when it comes to television. It's too impersonal and I am too guilt-ridden.
Permalink: Why_I_don_t_like_Amazon_anymore_.html
Words: 708
Location: Buffalo, NY
Last Modified: 10/07/11 09:28
Category: eating in
10/06/11 08:36 - ID#55245
Moroccan Cuisine
To me, it represents a global dilemma. Would you rather live in the past and insist that change is disturbing because you don't quite understand it (or want to take the pains to understand it) or would you just accept that the future is here and evolve with it?
The way I have phrased it above makes it sound as if the right answer is choosing the future and evolving. That is because I want to choose that answer. I want everyone to choose that answer. But sometimes, there is no right answer to a question like this. The article about Moroccan cuisine cookbooks illustrates this point so well.
On an aside, I really want to make this bread someday:
Maybe I can this weekend.
Permalink: Moroccan_Cuisine.html
Words: 141
Location: Buffalo, NY
Last Modified: 10/06/11 08:43
Category: goals
10/03/11 07:57 - ID#55236
Clueless about regex
^ : start of string [ : beginning of character group a-z : any lowercase letter A-Z : any uppercase letter 0-9 : any digit _ : underscore ] : end of character group * : zero or more of the given characters $ : end of string
Now I can't even write code for matching a variable length sentence or phrase in curly brackets for example:
{A quick brown FOX jumps over a sprightly hare}
Hmm... this does not work
(\{)[.*?](\})
This doesn't work
(\\{).*?(\\})
This doesn't work either.
\\{.*?\\}
ARRRGH.
It's funny how it's called regular.
References
1.
2.
3.
4.
Permalink: Clueless_about_regex.html
Words: 119
Location: Buffalo, NY
Last Modified: 10/03/11 08:26
Author Info
Date Cloud
- 12/21
- 12/15
- 02/15
- 01/15
- 11/14
- 08/14
- 04/14
- 02/14
- 11/13
- 07/13
- 09/12
- 08/12
- 07/12
- 04/12
- 03/12
- 02/12
- 01/12
- 12/11
- 11/11
- 10/11
- 09/11
- 08/11
- 07/11
- 06/11
- 05/11
- 04/11
- 03/11
- 02/11
- 01/11
- 12/10
- 11/10
- 10/10
- 09/10
- 08/10
- 07/10
- 06/10
- 05/10
- 04/10
- 03/10
- 02/10
- 01/10
- 12/09
- 11/09
- 10/09
- 09/09
- 08/09
- 07/09
- 06/09
- 05/09
- 04/09
- 03/09
- 02/09
- 01/09
- 12/08
- 11/08
- 10/08
- 09/08
- 08/08
- 07/08
- 06/08
- 05/08
- 04/08
- 12/07
- 11/07
- 10/07
- 09/07
- 08/07
- 07/07
- 06/07
- 05/07
- 04/07
Category Cloud
More Entries
My Fav Posts
- Click the heart at the bottom of anyone's blog entry to add it here ;(
Now I have no way to adjust resolution or brightness. There is no way for me to adjust/turn it off in BIOS. I checked.
My assumption that the nvidia card is an add-on (probably pci express) and the laptop came with a main board with sandy bridge bridge providing onboard graphics. But as always, I could be wrong.